Main Menu
Heading Style 3
Lightweight molded 19" rack cases with front & rear rails.
Click here for more details..
Audio cables with Neutrik or Switchcraft XLR connectors
DMX Data cables with serial data rated wire and 3 or 5 pin Neutrik XLR connectors.
Instrument cables balanced and unbalanced inter-connect cables for your sound gear.
Video & AV cables plus extended length VGA, s-video component, DVI & HDMI
Tech Tip
Case caret is actually made of finely woven plastic fibers and no backing, The carpet itself is waterproof but will not prevent water from passing through to materials beneath.
The carpet will also melt when exposed to extreme heat.
Take both of these factors into account in your design.
Hardware
 |
Surface Handle Sold in Pairs |
Heavy duty spring-loaded flip handle with rubber grip for
comfort. Best all purpose
case handle. Set contains 1 pair of handles. Dim: 3¼ x 5½ in.
Model
H1052-Z
Zinc finish
Price $ 11.95
/pair |
|
|
||
 |
Recessed Handle Sold in Pairs |
Heavy duty spring-loaded flip handle
in recess dish has
soft padded handle for comfortable grip. Set contains 1 pair of handles. Dim: 4¼ x 6¼ in.
Model
H1051-Z
Zinc finish
Price $ 13.95
/pair |
|
|
||
 |
Lift-off Hinges Sold in pairs |
These hinges allow covers to be
completely removed while case is in use, yet hold tight
during transport.
Small (1.75" x 2.25")
P0625-Z
Zinc finish Price $ 4.95 /pair Large (2.25" x 3")
P0626-Z
Zinc finish Price $ 5.95 /pair |
|
|
||
 |
Plastic Stacking Corner Sold in sets of 8 |
Soft plastic stacking corner has bump and
matching dimple allowing similar sized equipment racks
to stack together without sliding. Pliable plastic slides easily and won't scratch
surfaces on which equipment is
moved! Dim: 2" x 2" Model C1214 Black finish Price $ 7.95 (set of 8) |
|
|
||
 |
Metal Corner Sold in sets of 8 |
Flat metal corner available as
shown, or in 2 leg version to suit the open edge of rack cases. Dim:
2" x 2"
Three Leg (pictured)
C
0675-Z
Zinc finish Price $
11.95 (set
of 8) Two Leg (for corners at an open face)
C
0680-Z
Zinc finish Price $
11.95 (set
of 8) |
|
|
||
 |
Draw
Bolt Catch Sold in pairs |
Standard
surface mount draw bolt in two sizes with black or nickel finish.
Small (1.5" x 2.75")
L 0561-Z
Nickel finish Price $ 3.95 /pair Large (1.75" x 3.25")
L 0566-Z
Nickel finish Price $ 6.95 /pair |
|
|
||
 |
Corner Brace Sold in sets of 8 |
Small steel corner brace with zinc finish. Dim: 1" x 1.5" sq B 0702-Z Zinc finish Price $ 3.95 (set of 8) |
|
|
||
 |
Recessed Butterfly Catches |
Recommended for large cases, heavy loads,
or racks which must pass through automated handling
equipment.
Small (3.5" x 3.5")
L
904/914-Z Zinc finish Price $ 7.95 Medium (4" x 4.125")
L
905/915-Z Zinc finish Price $ 11.95 Large (5" x 6.25")
L
925/529-Z Zinc finish Price $ 13.95 |
|
|
||
 |
Case Carpet |
Professional non-woven carpet for cabinets, speakers, and more. 6 foot wide roll cut to your length. Minimum order is 4 feet. Price is per linear foot. 1 lin.ft = 6 sq.ft = 1 foot x 6 foot section M 5005 Black
carpet Price $ 4.95 |
|
|
||
 |
Casters Sold in sets of 4 |
2" swivel caster with roller
bearings and gray wheel. Carrying weight per wheel is 80 lbs. For
heavier application use 3" castor that supports up to 130 lbs per
wheel
W
0960 2" swivel castor Price $
34.95 W
0980 3" swivel castor Price $
87.95 |
|
|
||
|
|
Rack
Rail Sold in pairs
|
Full hole imperial rack rail in 45
space lengths. Steel with black finish and pre-tapped 10/32 mounting
holes. Use with RS-25 rack screws below. steel full hole rack rail R 0821 Price $ 63.95 /pair |
|
|
||
 |
Rack Screws
Sold in sets of 25 |
Pan head 10/32 x 3/4" steel
machine screws with black finish for use with imperial rack rail, or any
standard pre-tapped rail. Package of 25 includes nylon washers to
prevent marring of equipment and panels. screw & washer (25pc) RS-25Pack Price $ 7.95 set |
